Application domains

• realization of high performance and resistant joints of tiles or ceramic coverings from 1 to 15 mm width : joints of marble, natural stone, ceramic tiles, terracotta and faïence
• realization of high performance and resistant joints of tiles or ceramic coverings from 1 to 15 mm width : joints of marble, natural stone, ceramic tiles, terracotta and faïence
• also suitable for repairing damaged joints

Permitted substrates

• floors and walls, inside and outside
• commercial floors subject to heavy foot traffic
• private pools
• performance suitable for use on wood floors, underfloor heating (hot water or electric), tiling on cement substrate or wood

USAGE LIMITS

•  do not use webercolor premium :
  
  • in premises subject to cleaning under high pressure (≥ 80 bars): use weberepox easy
  • in premises subject to aggressive products (acids with pH < 3, strong detergents, etc.): use weberepox easy
  • in premises subject to specific hygiene regulations : weberepox easy
  • on highly porous tiles
  • In public swimming pools : use weberepox easy
  • in swimming pools filtered by an electrophysical process
  • For grouting of glass mosaic stuck on nets in swimming pools : use weberepox easy

USE PRECAUTIONS

• observe the precautions marked on the package

PROCESSING PROPERTIES

• life of the mixture : 40 min to 1 hour
• waiting time before full curing : minimum 4-8 hours
• waiting time before floor commissioning : minimum 12 hours
• joint width : from 1 to 15 mm

shorten these times at +20°C at higher and lengthen them at lower temperatures

IDENTIFICATION

• composition : white cement, re-dispersible resin, quartz sands, cellulose derivatives, water repellents, pigments

PERFORMANCE

• classified according to EN 13888 : CG2 WAr
• density of the cured mortar : 1.8
• abrasion resistance : ≤ 1000 mm³
• flexural strength after 28 days : ≥ 2.5 N/mm²
• compressive strength after 28 days : ≥ 15 N/mm²
• water absorption after 30 min. exposure : ≤ 2 g
• water absorption after 240 min. exposure : ≤ 5 g
• temperature resistance : from -20°C to +100°C
• chemical resistance :
  
  
  • chlorinated water : ++
  • NaOH 2 g/l : ++
  • bleaching water : ++
  • NaOH 10 g/l : ++
  • lactic acid 2% : ++
  • hydrogen chloride 2% : +
  • lactic acid 5% : +
  • hydrogen chloride 5% : 0

++ = very good resistance + = average resistance 0 = no resistance

these values are results of standardized laboratory tests. They can be modified significantly by the conditions of application on site

REFERENCE DOCUMENTS

• tested in accordance with the European Standards (EN) applicable

CONSUMPTION

• from 0.1 to 2 kg/m² depending on the joint width, joint depth and tile format