Fermacell

Fermacell Gypsum fiberboards consist of gypsum and paper fibers, both extracted from a recycling process of waste materials. Innovative and ecologically sound.

Fermacell Gypsum fiberboards consist of gypsum and paper fibers, both extracted from a recycling process of waste materials. Innovative and ecologically sound.

Fermacell Gypsum fiberboards consist of gypsum and paper fibers, both extracted from a recycling process of waste materials. Innovative and ecologically sound.

Fermacell Gypsum fiberboards consist of gypsum and paper fibers, both extracted from a recycling process of waste materials. Innovative and ecologically sound.

Fermacell Gypsum fiberboards consist of gypsum and paper fibers, both extracted from a recycling process of waste materials. Innovative and ecologically sound.

Fermacell floor elements is composed of 2 gypsum fiber boards of 10 mm and 10 mm mineral wool. The floor elements are suitable for fire protection, sound insulation, thermal insulation, for application on floor heating systems and for finishing floors for floor tiles, for example.

Seams and beveled edges of Fermacell or plasterboard can be easily sealed with this joint filler. Screw holes or small damages can also be sealed with this joint plaster.

Seams and beveled edges of Fermacell or plasterboard can be easily sealed with this joint filler. Screw holes or small damages can also be sealed with this joint plaster.

Fermacell Joint Adhesive is used for joining butt-mounted Fermacell Gypsum Fiberboards and Fermacell Powerpanel H2O boards in wall and ceiling surfaces. The adhesive is only suitable for bonding during intermediate application to the panel head.

Fermacell Floor Element Assembly Adhesive is a 1-component polyurethane based adhesive. The adhesive is suitable for bonding Fermacell 2E gypsum fiberboards/floor elements and Fermacell Powerpanel Floor elements.

Drywall screws for fastening Fermacell boards. These screws have a special coating against corrosion and thus offer the optimum protection. Due to the geometric thread they penetrate perfectly into the boards and thus offer a special hold.

Drywall screws for fastening Fermacell boards. These screws have a special coating against corrosion and thus offer optimum protection. Due to the geometric thread they penetrate perfectly into the boards and thus offer a special hold.

Drywall screws for fastening Fermacell boards. These screws have a special coating against corrosion and thus offer optimum protection. Due to the geometric thread they penetrate perfectly into the boards and thus offer a special hold.

Corrosion-resistant screws with drill point for fixing single-layer H2O cladding to a reinforced metal substructure (metalstuds). Consumption: approx. 10 screws/m² per sheet face for walls, approx. 21 screws/m² per sheet face for ceilings.

With Fermacell's proprietary joint adhesive, you can glue the boards together and seal the insulation.

Levelling granules for levelling a substrate. These grains have been developed for the substrate of Fermacell screeds. These granules are applied dry to a maximum height of 100 mm. Their low weight makes them ideal for floors with a low bearing capacity.

Fermacell leveling compound is used to level floors when the level difference between the lowest and highest point is maximum 1cm. This leveling compound is particularly suitable for leveling subfloors in indoor areas.

Fermacell construction adhesive, suitable for gluing floor elements together. This single-component adhesive is made from polyurethane.

To prevent sound transmission through walls, edge strips should be installed before laying the floor elements for decoupling with the walls. (60 strips in a box.)

Fermacell Joint Plaster 5kg can be used for jointing Fermacell boards and for sealing fixing holes. Below are the advantages of the grouting plaster.

Fermacell screw for fixing H2O panels.

Fermacell Mesh Tape is a self-adhesive joint tape for finishing ABA joints of Fermacell boards. The mesh tape reinforces the ABA joints and thus prevents cracking. Fermacell mesh tape is easy to apply to the joints due to its self-adhesive effect.

Foil for protecting Fermacell dry leveling granules on the subfloor and so that they do not fall through open spaces, cracks or holes.

FERMACELL Primer is suitable for interior applications as a pretreatment for FERMACELL Liquid Film, FERMACELL Flexible Tile Adhesive or FERMACELL Powerpanel Finishing Mortar.

Suitable as joint reinforcement for Fermacell gypsum fiberboards with beveled edge.

Fermacell Sealing Tape is suitable for waterproofing seams and connections in wet areas, such as bathrooms and toilet rooms. This Fermacell sealing tape is also necessary for sealing corners. The corners must first be treated with Fermacell Liquid Foil.

The screws provide the necessary pressing force for the adhesive layer and prevent unevenness in the subfloor.